Whole House Filter-Ag Plus Sediment Water Filter System with 10" x 54" Tank | Backwash Valve
Whole House Filtration System
This system comes with the Following:
1 Timer Valve: Backwash Valve
Transformers as needed
1.5 cubic foot of Filter-Ag plus (Pre-loaded for easy installation)
10" x 54" MINERAL TANK
APPLICATION:
WHOLE HOUSE FILTRATION
WATER DISPENSING SYSTEM
COMMERCIAL RO SYSTEM (AS PRE FILTER)
USE AS PER-TREATMENT OR POST FILTRATION FOR SOFTENING & RO SYSTEMS.
- Deep Bed Filtration: Provides superior water quality and reduces the load on downstream equipment.
- High Sediment Removal: Extends filter run times, saving on backwash water and maintenance.
- High Service Flow Rates: Allows for lower equipment costs and space savings.
- Reduced Shipping Costs: Lighter weight compared to traditional media.
- Replacement of Multimedia: Can increase filter capacity in existing installations.
- Natural and Environmentally Safe: Made from a natural mineral.
- Low Pressure Drop: Reduces energy consumption.
- High Solids Loading: Can handle higher concentrations of suspended matter.
- Versatile: Suitable for both pressure and gravity systems.
- Air Scour Compatible: Air scour can be used during backwashing to improve performance.
ADVANTAGES
Deep bed filtration results in superior water quality and reduces the load on downstream equipment.
High sediment removal capacity results in longer filter runs, with a substantial savings in backwash water and time out of service.
High service flow rates result in lower equipment costs and a savings in space.
Reduced shipping cost due to lighter weight/cu.ft.
Replacement of multimedia with Filter-Ag Plus in existing installations may increase filter capacity.
Filter-Ag Plus is an all-natural, environmentally safe product.
PHYSICAL PROPERTIES
Color: Light tan to near white
Bulk Density: 50 lbs./cu. ft.
Specific Gravity: 2.2 g/cc
Mesh Size: 14 x 30
Effective Size: 0.55 mm
Uniformity Coefficient: 1.8
Hardness: 4-5 (Mohs scale)
CONDITIONS FOR OPERATION
Water pH range: wide range
Maximum water temperature: 140°F/60°C
Bed depth: 24-36 in.
Freeboard: 50% of bed depth (min.)
Service flow rate: 12-20 gpm/sq.ft.
Backwash flow rate: 15-20 gpm/sq.ft.
Backwash bed expansion: 30-40% of bed depth
Local conditions may require lower flow rates
A gravel support bed is required
Allow bed to saturate before initial backwash
| Model Number | 1054BWAG |
|---|---|
| UPC | 818368013309 |
| Brand | Premier Water Systems |
| Item Number | 0 |
| Shipping Length | 10 |
| Shipping Width | 10 |
| Shipping Height | 54 |
| Shipping Weight | 110 |
