10" Transparent Big Blue Housing for Whole House Water Filtration System, 1” Brass Port & Mounting Hardware (2 pack)
10" Transparent Housings for Whole House Water Filtration System with 1" Inlet / Outlet Brass Ports Pressure Relief Button - is proper for high-flow and heavy sediment applications. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene for toughness.
The black cap has 1" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.
These Housings are for use in various high-flow applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation.
Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs.
These Housings Can Be Used With Following 10” x 4.5” Filter Cartridges (Sold Separately):
Sediment Water Filter
Pleated Washable Sediment Water Filter
Block Activated Carbon Water Filter Cartridge
Granular Activated Carbon Water Filter Cartridge
Special Water Filter Cartridge
Product Features: 10” Transparent Full Flow Housing
1” Inlet / Outlet Brass Ports
Pressure Relief Button
Initial Pressure Drop: 1 PSI
Maximum Operating Pressure: 60 PSI
Operating Temperature: 39°F~125°F (4°C~52°C)
Wall Mounting Bracket
Sets of Screws
WARNING: OPERATING PRESSER NO MORE THAN 60 PSI
|Brand||Premier Water Systems|